Sensor Clean™ liquid sensor cleaning solution
What’s Inside
- Sensor Clean™ liquid sensor cleaning solution (one bottle)
Key features:
- Removes water based stains and light dust contamination
- Excellent dust repellent properties and anti-fogging capabilities
- Nonflammable (can be shipped by airplane)
-
PRODUCT HIGHLIGHTS
- Removes water based stains and light dust contamination
- Excellent dust repellent properties and anti-fogging capabilities
- Compatible with MXD-100 Green swabs ONLY
- Non-flammable
- Non-alcoholic
- Can be shipped by airplane
Sensor Clean™ has many characteristics that make it an excellent choice for cleaning your camera’s sensor. While Sensor Clean™ is best used on water based stains and light dust contamination, it also provides excellent dust repellent properties and anti-fogging capabilities.
It is recommended to use Sensor Clean with MXD-100 Green sensor cleaning swabs ONLY.
All of our solutions are safe on ITO and non ITO coated sensors.
VisibleDust liquid cleaners (Sensor Clean, VDust Plus and Smear Away) when used with VisibleDust Sensor Cleaning Vswabs are safe and effective on ALL digital SLR and mirrorless cameras including: newer Canon DSLRs, such as the 400D, 40D, 1D MKIII, and 1Ds MKIII, Newer Nikon D300 and D3 and Alpha Sony 700.
Sensor Clean™ is compatible with:
VisibleDust sensor cleaning swabs and solutions are calibrated to work together to produce optimal and safe results.
Please DO NOT USE alternative solutions with our swabs. -
Sensor Clean liquid sensor cleaning solution – 8 ml | 0.27 oz
SKU: 2291205-2
UPC: 827912060232
EAN: 8024221521924
Sensor Clean liquid sensor cleaning solution – 15 ml | 0.51 oz
SKU: 2291205-1
UPC: 827912060102
EAN: 8024221520897
Sensor Clean liquid sensor cleaning solution – 60 ml | 2 oz
SKU: 19450571
UPC: 680577744479
EAN: N/A
Sensor Clean liquid sensor cleaning solution – 120 ml | 4 oz
SKU: 19450564
UPC: 680577744462
EAN: N/A
-
How to clean Canon EOS 80D sensor using Sensor Clean solution and sensor cleaning swabs Vswab MXD-100 Green 1.6 x / 16 mm size from VisibleDust
- Refer to your camera’s manual on how to expose the sensor.
- Brush the sensor surface with Arctic Butterfly® Sensor Brush®. Alternatively, use Zee Pro™ or Zeeion® anti-static bulb blower to remove dry contaminants.
- Add 2-4 drops of Sensor Clean™ on the fabric of MXD-100 Green Vswab™.
- Wait to allow for even saturation of the swab (can be calibrated from a few seconds to 30 seconds depending on environmental conditions). Do not allow the swab to dry out.
- Using Vswab™, wipe across the sensor with gentle pressure once, in a single smooth motion. If it is necessary, turn Vswab over on the other side and repeat. Ensure you wipe in the same direction both times.
- Discard the swab after a single use.
- Allow the sensor to dry out completely. If needed, use the Arctic Butterfly® Sensor Brush® for complete cleaning.
- Proceed with checking the image.
- Repeat if necessary.